MAGLOC® EasyFit MagWell for Springfield XD 9; XD 45 standard frame in 9mm, 40 S&W and 45 ACP Cal.

Magloc is a registered trademark of Smart Lock Technology Inc. in the United States Patent and Trademark Office since 1997.  Registration number: 75074255

MAGLOC® EasyFit  MagWell for Springfield XD 9; XD 45 standard frame in 9mm, 40 S&W and 45 ACP Cal.
**The first magwell available on the market for this pistol**
CAN $ 35.00

We have two models:

#1620 EasyFit MagWell for Springfield XD/HS 2000 in 9mm and .40 S&W
For Standard frame 9mm & .40 S&W Does not fit compact our sub-compact models 
(Does not fit some XD models made after March 2005 that has blockage inside the handle hole unless the blockage is trimmed off as shown on our photos.)

Features:
1. Increase the existing magazine well opening by 45%.
2.  Protect the magazine well opening from wear & tear.
3.  Holes can easily be drilled for the attachment of lanyard.
4.  Lightweight and tight fit for daily carry or competition. 

Specification:
1.  Fits Springfield XD/HS 2000 models: 4" Service Model   & 5" Tactical Model in 9mm and .40 S&W cal. (does not fit XD in 45ACP cal. XDM)
(Does not fit some XD models made after March 2005 that has blockage inside the handle hole unless the blockage is trimmed off.)
2.  Made of glass fill nylon - durable and long lasting
3.  Weight:     0.34 oz (9.6 g ram)
4.  Maximum outside width: 1.47" (37.5mm) 
5.  Inside width: 1.44"(36.6mm) 
6.  Original inside width of gun of handle: 0.98"(24.8mm) 
**Increases original magazine well opening by 0.46" (11.8mm) - 47%
(Note: different shooting sports have different limitation on firearms modification, please consult with the proper authority.) 

#1650 EasyFit MagWell cover for Springfield XD 45 Standard Frame in .45 ACP cal.
(Does not fit compact our sub-compact models. Does not fit XD9/40; XDM or XDS models.)

Features:
1. Increase the existing magazine well opening by 38%.
2.  Protect the magazine well opening from wear & tear.
3.  Holes can easily be drilled for the attachment of lanyard.
4.  Lightweight and tight fit for daily carry or competition. 

Specification:
1.  Fits Springfield XD/HS 2000 models: 4" Service Model & 5" Tactical Model in .45ACP cal. 
2.  Made of glass fill nylon - durable and long lasting
3.  Weight:     0.34 oz (9.6 g ram)
4.  Maximum outside width: 1.53" (39.0mm) 
5.  Inside width: 1.46"(37.2mm) 
6.  Original inside width of gun of handle: 1.06"(26.9mm) 
**Increases original magazine well opening by 0.40" (10.3mm) - 38%  

(Note: different shooting sports have different limitation on firearms modification, please consult with the proper authority.) 

Installation:
Warning - always wear eye protection if assembly or disassembly of firearms is required.  Make sure the gun is not loaded before starting the following process.
If you are not comfortable with the installation procedures described below, please have the work done by a qualified gunsmith. 

1.  Unscrew the attached screw.
2.  Slide the magwell into the handle hole of the firearm.  
3.  Check and see if the MagWell is tight fit with the handle.
4.  Insert an empty magazine for fitting test
5.  To prevent accidental loss, you can attach the MagWell onto the handle
     with the attached screw.