Magloc is a registered trademark of Smart Lock Technology Inc. in the United States Patent and Trademark Office since 1997. Registration number: 75074255
MAGLOC® EasyFit MagWell for S&W M&P and M2.0 Standard Frame
CAN $ 30.60
Note: All prices on this website are in Canadian $. One US$ is about 1.3 CAN$ as on November 2020)
Two Models:
#1660 for S&W M&P and M2.0 Standard Frame in 9/40
#1690 for S&W M&P and M2.0 Standard Frame in 45 ACP
*First released on December, 2007 after over one year R&D - the first and only type of magwell available for S&W M&P Pistols*
#1660 for S&W M&P and M2.0 Standard Frame in 9/40
Features:
Improves reloading speed by 50%
Increases magazine well opening by 58%
Protects magazine well of firearm
Specification:
Fits Smith & Wesson M&P Pistols in 9mm and 40S&W with medium and small size backstrap.
(Does not fit M&P Compact; need to remove bottom edge of large backstrap for proper fit).
Made of polymer (nylon) material, durable and long lasting
Weight - 0.35 OZ (9.9 gram)
original frame tool - 0.16 OZ (4.6 gram)
weight added - 0.9 OZ (5.3 gram)
Maximum width - 1.60¨ (40.6mm)
Inside width - 1.50¨(38.1mm) - increased by 58%
Original inside width of S&W M&P magwell -0.95¨ (24.1mm)
#1690 for S&W M&P and M2.0 Standard Frame in 45 ACP
Features:
Improves reloading speed by 50%
Increases magazine well opening by 55%
(58% is on improved version released on September 2014. Previous version is 49%)
Protects magazine well of firearm
Specification:
Fits Smith & Wesson M&P M2.0 Standard Frame Pistols in 45 ACP Cal. with medium and small size backstrap.
(Does not fit M&P Compact; need to remove bottom edge of large backstrap for proper fit).
Made of polymer (nylon) material, durable and long lasting
Weight - 0.28 OZ (7.9 gram)
original frame tool - 0.16 OZ (4.6 gram)
weight added - 0.12 OZ (3.3 gram)
Maximum width - 1.47¨ (37.3mm)
Inside width - 1.41¨(35.8mm) - increased by 55%
Original inside width of S&W M&P 45 ACP magwell -0.90¨ (23.0mm)
Installation:
1. Make sure the firearm is unloaded.
2. Remove the magazine from the gun handle.
3. Rotate the 'Frame Tool' 1/4 turn (90 degree) and pull it out (it is very tight fit) - picture A.
4. Insert the 'Frame Insert' to replace the 'Frame Tool' - picture B.
5. Place the U shape magwell onto the 'Frame Insert' and screw tight - picture C.
6. Insert an empty magazine for fit testing.
7. Live fire at an approved area to get use with this new fixture.
Note: If you are not comfortable with the installation, please have a qualified gunsmith to do the job for you.
Note: This item with bubble envelope has total thickness less than 2 cm and will be shipped by letter mail at $3.50 within no insurance nor tracking number. Shipping with tracking and $100 insurance is $20. Please email us if you need this service.
**We accept Visa, MasterCard and American Express via "MyVirtualMerchant" (Costco - Elavon Merchant Service). Bank Deposit for purchase within Canada only. Please pay by EMT to: vancouvergunshop@hotmail.com no security answer is required.
