Grip Tape for SW99, Walther P99 and similar Pistols
Specification:
1. Made of ‘3M Safety – Walk #310’ rubber texture slip-resistant tape. The best material for this application.
2. Fits all regular size SW99 and most other types of pistols.
3. Weight – all parts total 0.28 oz (8 gram).
4. Thickness – 0.049” (1.25 mm).
**Please note that some shooting competitions have a limit on the use of grip tape on the pistol. **
Total Grip Tape Parts in package – 20 pieces
1. 1.58” (40.3mm) x 0.40” (10.0mm) – 2 pieces.
2. 0.95” (24.1mm) x 0.49” (12.4mm) – 4 pieces
3. 1.58” (40.3mm) x 0.49” (12.4mm) – 14 pieces
Installation:
1. Make sure the gun is not loaded.
2. Make sure the applied area is free from dirt, moisture, gun oil or oil of any type.
You can try taping a masking tape (or any other type of tape) onto the gun handle for cleanness testing. If the tape comes off, so will our grip tape.
3. Line up the parts on the pistol and make necessary adjustment or trimming before peeling off the backing.
4. Use the red line (if not clear, mark one your self) on the tape for centering when applying the tape on the front and back portion of the handle.
5. If required, tapes can easily be removed by starting from the edges without leaving severe markings on the pistol. Once removed, it cannot be reuse.
6. Test your firearm with this new fixture before actual using.
**Note: If you are not comfortable with the installation procedures described
below, please have the work done by a qualified gunsmith. **
Coll
